Broach Cutters for Fein Magnetic Drilling Machines. Broach Cutters made of high-speed tool steel with 8% of cobalt for greater heat resistance and wear protection. For Quick-in tool holder systems. Use coupon code WELCOMEGST at checkout and get 25% Discount on all Broach Cutters.

HSS-Co 8-F
Core Drills Short

> 35 mm Cutting depth. High Speed Steel With 8% Cobalt.
> 18 mm shank for Quick-in tool holder systems

Fein Annular cutters
Diameter in mmOrder no.PriceQty
21,590.00  + 18% GST
21590
1,980.00  + 18% GST
1980
1,980.00  + 18% GST
1980
1,980.00  + 18% GST
1980
2,043.00  + 18% GST
2043
2,043.00  + 18% GST
2043
2,084.00  + 18% GST
2084
2,084.00  + 18% GST
2084
2,244.00  + 18% GST
2244
2,244.00  + 18% GST
2244
2,258.00  + 18% GST
2258
2,355.00  + 18% GST
2355
2,509.00  + 18% GST
2509
2,509.00  + 18% GST
2509
2,709.00  + 18% GST
2709
2,709.00  + 18% GST
2709
2,709.00  + 18% GST
2709
2,709.00  + 18% GST
2709
2,990.00  + 18% GST
2990
2,990.00  + 18% GST
2990
3,250.00  + 18% GST
3250
3,250.00  + 18% GST
3250
3,350.00  + 18% GST
3350
3,585.00  + 18% GST
3585
3,752.00  + 18% GST
3752
3,842.00  + 18% GST
3842
4,238.00  + 18% GST
4238
4,238.00  + 18% GST
4238
4,447.00  + 18% GST
4447
4,676.00  + 18% GST
4676
5,093.00  + 18% GST
5093
5,093.00  + 18% GST
5093
5,489.00  + 18% GST
5489
5,489.00  + 18% GST
5489
5,989.00  + 18% GST
5989
5,989.00  + 18% GST
5989
6,363.00  + 18% GST
6363
6,427.00  + 18% GST
6427
6,760.00  + 18% GST
6760
6,760.00  + 18% GST
6760
7,330.00  + 18% GST
7330
7,377.00  + 18% GST
7377
7,813.00  + 18% GST
7813
8,304.00  + 18% GST
8304
8,304.00  + 18% GST
8304
8,591.00  + 18% GST
8591
8,764.00  + 18% GST
8764
9,070.00  + 18% GST
9070
9,623.00  + 18% GST
9623
9,684.00  + 18% GST
9684
10,145.00  + 18% GST
10145
ZAK 075 Ejector pin

ZAK 096 Ejector Pin

For 12 to 60 mm diameter cutters of 35 mm length

No Reviews

For 12 to 60 mm diameter cutters of 35 mm length cutters.

in stock
329.00  + 18% GST Add to cart

PowerCLEANER Chips Removing & Cleaning Tool

Chips Removing & Cleaning Tool

No Reviews

PowerCLEANER is a new innovative Chips Removing & Cleaning Tool from BDS. It has a hook which helps the operator remove the revolved metal chips around broach cutters to drill bits, then the special brush is used to move or clean the chips from the workplace and collect in a dustbin. When this tool the operator does not anymore requires Allen key/screwdriver to remove chips from broach cutter and does not require a paintbrush for cleaning chips. The metal chips are very hot and can burn the fingers, using powerCLEANER helöps increase the safety of the operator and keep the work area clean.

50in stock
1,688.00  + 18% GST Add to cart
cutting oil for hss broach cutter

Cutting Oil – 1 Liter

For HSS Broach Cutters

No Reviews

The BDS Cutting oil should be used in pure form without mixing water. While using a HSS broach cutter ist very important to use cutting oil for longer life of the broach cutter. Many operators use normal lubricant while drilling with broach cutters but, this normal lubrcant has no effect on broach cutter. The life.

in stock
933.00  + 18% GST Add to cart

Carbide-Tipped Broach Cutters For Fein MAgnetic Drilling Machines. For Quick-in tool holder systems. Use coupon code WELCOMEGST at checkout and get 25% Discount on all Broach Cutters.

Carbide-F
Core Drills Short

> 35 mm cutting depth. Tungsten Carbide Tip (TCT).
> 18 mm shank for Quick-in tool holder systems

Quick-in TCT annular cutters
Diameter in mmOrder no.PriceQty
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,662.00  + 18% GST
2662
2,932.00  + 18% GST
2932
2,932.00  + 18% GST
2932
2,932.00  + 18% GST
2932
2,932.00  + 18% GST
2932
2,932.00  + 18% GST
2932
3,430.00  + 18% GST
3430
3,430.00  + 18% GST
3430
3,430.00  + 18% GST
3430
3,430.00  + 18% GST
3430
3,430.00  + 18% GST
3430
3,905.00  + 18% GST
3905
3,905.00  + 18% GST
3905
3,905.00  + 18% GST
3905
3,905.00  + 18% GST
3905
3,905.00  + 18% GST
3905
4,685.00  + 18% GST
4685
4,685.00  + 18% GST
4685
4,685.00  + 18% GST
4685
4,685.00  + 18% GST
4685
4,685.00  + 18% GST
4685
5,366.00  + 18% GST
5366
5,366.00  + 18% GST
5366
5,366.00  + 18% GST
5366
5,366.00  + 18% GST
5366
5,366.00  + 18% GST
5366
6,271.00  + 18% GST
6271
6,271.00  + 18% GST
6271
6,271.00  + 18% GST
6271
6,271.00  + 18% GST
6271
6,271.00  + 18% GST
6271
6,925.00  + 18% GST
6925
6,925.00  + 18% GST
6925
6,925.00  + 18% GST
6925
6,925.00  + 18% GST
6925
6,925.00  + 18% GST
6925
ZAK 075 Ejector pin

ZAK 096 Ejector Pin

For 12 to 60 mm diameter cutters of 35 mm length

No Reviews

For 12 to 60 mm diameter cutters of 35 mm length cutters.

in stock
329.00  + 18% GST Add to cart

PowerCLEANER Chips Removing & Cleaning Tool

Chips Removing & Cleaning Tool

No Reviews

PowerCLEANER is a new innovative Chips Removing & Cleaning Tool from BDS. It has a hook which helps the operator remove the revolved metal chips around broach cutters to drill bits, then the special brush is used to move or clean the chips from the workplace and collect in a dustbin. When this tool the operator does not anymore requires Allen key/screwdriver to remove chips from broach cutter and does not require a paintbrush for cleaning chips. The metal chips are very hot and can burn the fingers, using powerCLEANER helöps increase the safety of the operator and keep the work area clean.

50in stock
1,688.00  + 18% GST Add to cart
coolant for tct broach cutter

Coolant – 1 Liter (Water Soluble 1:9)

For TCT Broach Cutters

No Reviews

The BDS Coolant should be used in 1:10 proportion. So 1 liter of the bottle makes 10 liters of coolant. It is very important to use Coolant while drilling with TCT broach cutters. TCT broach cutters have carbide tips, the carbide tips are very strong and actually do not need any lubrication for cutting but, the carbide tips are brazed as tips of broach cutter, this brazing need to remain cool. If the brazing gets hot the chances of carbide tips coming out of brazing are high. For this reason, the operators should use coolants for TCT broach cutters and not lubricants. The use of BDS coolants on any brand of TCT broach cutter can increase the life of cutter to 30 – 50%.

in stock
1,775.00  + 18% GST Add to cart

Have problems in buying products? Please call us between 09:30 AM to 6:30 PM Indian time on +91-9823559694

Web Analytics