20 Percent Discount on india broach cutterTungsten Carbide Tipped Rail Cutters for rail drilling, specially developed to drill hard and corroded material. Tungsten Carbide Tipped Rail Cutters have become a successful range of tools worldwide. BDS provides for the rising demand by expanding its range with specially developed Tungsten Carbide Tipped Rail Cutters for rail drilling. BDS develops the special TCT Rail Cutters for rail track drilling.

Carbide-RAIL
Core Drills (Rail Cutters)

> 30 mm Cutting depth
> 19 mm Weldon shank (3/4“)

rail core drills india
Diameter in mmOrder no.PriceQty
12,275.70  + Tax
12275708377
12,275.70  + Tax
12275708377
12,275.70  + Tax
12275708377
12,275.70  + Tax
12275708377
12,886.05  + Tax
12886058377
12,886.05  + Tax
12886058377
12,886.05  + Tax
12886058377
12,886.05  + Tax
12886058377
12,886.05  + Tax
12886058377
13,420.10  + Tax
13420108377
13,420.10  + Tax
13420108377
13,420.10  + Tax
13420108377
13,420.10  + Tax
13420108377
13,420.10  + Tax
13420108377
15,251.16  + Tax
15251168377
15,251.16  + Tax
15251168377
15,251.16  + Tax
15251168377
15,251.16  + Tax
15251168377
15,251.16  + Tax
15251168377
17,387.39  + Tax
17387398377

ZAK 075 Ejector Pin

For 12 to 60 mm diameter cutters of 30 mm length

No Reviews
in stock
330.00  + Tax Add to cart

PowerCLEANER Chips Removing & Cleaning Tool

Chips Removing & Cleaning Tool

No Reviews

PowerCLEANER is a new innovative Chips Removing & Cleaning Tool from BDS. It has a hook which helps the operator remove the revolved metal chips around broach cutters to drill bits, then the special brush is used to move or clean the chips from the workplace and collect in a dustbin. When this tool the operator does not anymore requires Allen key/screwdriver to remove chips from broach cutter and does not require a paintbrush for cleaning chips. The metal chips are very hot and can burn the fingers, using powerCLEANER helöps increase the safety of the operator and keep the work area clean.

in stock
1,688.00  1,200.00  + Tax Add to cart

Coolant for TCT Broach Cutters

No Reviews

The BDS Coolant should be used in 1:10 proportion. So 1 liter of the bottle makes 10 liters of coolant. It is very important to use Coolant while drilling with TCT broach cutters. TCT broach cutters have carbide tips, the carbide tips are very strong and actually do not need any lubrication for cutting but, the carbide tips are brazed as tips of broach cutter, this brazing need to remain cool. If the brazing gets hot the chances of carbide tips coming out of brazing are high. For this reason, the operators should use coolants for TCT broach cutters and not lubricants. The use of BDS coolants on any brand of TCT broach cutter can increase the life of cutter to 30 – 50%.

in stock
2,293.59  + Tax Add to cart