High-strength fully ground Broach Cutters that are machined under the effect of plasma with a hard coating in the range of 2.5 μ. As a result, these tools have considerably longer life and more uniform removal of chips, particularly with long Broach Cutters. An important aspect for occupational safety. These Broach Cutters on request are also available in different shanks like Universal Shank, Nitto Shank or Quick-In Shank. Use coupon code WELCOMEGST at checkout and get 25% Discount on all Broach Cutters.

Carbide-PLUS
Core Drills Short

> 30 mm Cutting depth
> 19 mm Weldon shank (3/4“)

TCT Carbide PLUS
Diameter in mmOrder no.PriceQty
3,460.00  + 18% GST
346000837718
3,460.00  + 18% GST
346000837718
3,460.00  + 18% GST
346000837718
3,460.00  + 18% GST
346000837718
3,460.00  + 18% GST
346000837718
3,460.00  + 18% GST
346000837718
3,460.00  + 18% GST
346000837718
3,460.00  + 18% GST
346000837718
3,460.00  + 18% GST
346000837718
3,460.00  + 18% GST
346000837718
3,460.00  + 18% GST
346000837718
3,460.00  + 18% GST
346000837718
3,811.00  + 18% GST
381100837718
3,811.00  + 18% GST
381100837718
3,811.00  + 18% GST
381100837718
3,811.00  + 18% GST
381100837718
3,811.00  + 18% GST
381100837718
4,460.00  + 18% GST
446000837718
4,460.00  + 18% GST
446000837718
4,460.00  + 18% GST
446000837718
4,460.00  + 18% GST
446000837718
4,460.00  + 18% GST
446000837718
5,077.00  + 18% GST
507700837718
5,077.00  + 18% GST
507700837718
5,077.00  + 18% GST
507700837718
5,077.00  + 18% GST
507700837718
5,077.00  + 18% GST
507700837718
6,091.00  + 18% GST
609100837718
6,091.00  + 18% GST
609100837718
6,091.00  + 18% GST
609100837718
6,091.00  + 18% GST
609100837718
6,091.00  + 18% GST
609100837718
6,975.00  + 18% GST
697500837718
6,975.00  + 18% GST
697500837718
6,975.00  + 18% GST
697500837718
6,975.00  + 18% GST
697500837718
6,975.00  + 18% GST
697500837718
8,152.00  + 18% GST
815200837718
8,152.00  + 18% GST
815200837718
8,152.00  + 18% GST
815200837718
8,152.00  + 18% GST
815200837718
8,152.00  + 18% GST
815200837718
9,003.00  + 18% GST
900300837718
9,003.00  + 18% GST
900300837718
9,003.00  + 18% GST
900300837718
9,003.00  + 18% GST
900300837718
9,003.00  + 18% GST
900300837718
ZAK 075 Ejector pin

ZAK 075 Ejector Pin

For 12 to 60 mm diameter cutters of 30 mm length

No Reviews

ZAK 075 Ejector Pin for 12 to 60 mm diameter cutters of 30 mm length

in stock
330.00  + 18% GST Add to cart

PowerWORKER

No Reviews

PowerWORKER is a magnetic cleaning tool used for cleaning metal chips from a workplace. Ist easy to use just move the PowerWORKER over the metal chips which will get attached to the PowerWORKER and then demagnetize the magnet over a dust bin where all the chips get collected. This is an important tool for the safety of the worker while drilling.

in stock
2,754.00  + 18% GST Add to cart

PowerCLEANER Chips Removing & Cleaning Tool

Chips Removing & Cleaning Tool

No Reviews

PowerCLEANER is a new innovative Chips Removing & Cleaning Tool from BDS. It has a hook which helps the operator remove the revolved metal chips around broach cutters to drill bits, then the special brush is used to move or clean the chips from the workplace and collect in a dustbin. When this tool the operator does not anymore requires Allen key/screwdriver to remove chips from broach cutter and does not require a paintbrush for cleaning chips. The metal chips are very hot and can burn the fingers, using powerCLEANER helöps increase the safety of the operator and keep the work area clean.

in stock
1,200.00  + 18% GST Add to cart
coolant for tct broach cutter

Coolant – 1 Liter (Water Soluble 1:9)

For TCT Broach Cutters

No Reviews

The BDS Coolant should be used in 1:10 proportion. So 1 liter of the bottle makes 10 liters of coolant. It is very important to use Coolant while drilling with TCT broach cutters. TCT broach cutters have carbide tips, the carbide tips are very strong and actually do not need any lubrication for cutting but, the carbide tips are brazed as tips of broach cutter, this brazing need to remain cool. If the brazing gets hot the chances of carbide tips coming out of brazing are high. For this reason, the operators should use coolants for TCT broach cutters and not lubricants. The use of BDS coolants on any brand of TCT broach cutter can increase the life of cutter to 30 – 50%.

in stock
1,775.00  + 18% GST Add to cart

At the moment the 55 mm length TCT Coated Core Drills are available to buy OFFLINE only. CAll us at 02402360363

coming soon

At the moment the 75 mm length TCT Coated Core Drills are available to buy OFFLINE only. CAll us at 02402360363

coming soon

At the moment the 55 mm length TCT Coated Core Drills are available to buy OFFLINE only. CAll us at 02402360363

coming soon

Have problems in buying products? Please call us between 09:30 AM to 6:30 PM Indian time on +91-9823559694

Web Analytics