Non Ferrous Material Drilling Clamp for Smooth Surface Plate

103,275.00  + 18% GST

Description

Drilling Stainless Steel Material Drilling Clamp – Magnetic core drilling machines from BDS can in their entirety also be used for the processing of non-ferrous metals and stainless steel. For that purpose, BDS offers clamping devices, which are provided with a pump with circular oil lubrication to build up a vacuum to ensure a safe connection between the magnetic core drilling machine and the workpiece.

Processing of non-ferrous metals and stainless steel. For that purpose, BDS offers clamping devices, which are provided with a pump with circular oil lubrication to build up a vacuum to ensure a safe connection between the magnetic core drilling machine and the workpiece.

Order Number: ZAV 400
Application: Suitable for smooth surfaces
Design: High performance vacuum pump with circular oil lubrication for Drilling Stainless Steel. Specially designed for drilling operation on non-ferrous material along with magnetic core drilling machines. Clamping plate with two suction areas and internal drilling area. Size: 440 X 260 mm, long hole: 50 X 120 mm

drilling non ferrous material
1. Place the clamping plate on the clean work-piece/plate to de drilled.
drilling non ferrous material
2. Connect the vacuum pump to the clamping plate with the tube provided.
drilling non ferrous material
3. Switch ON the vacuum pump.

 

 

 

 

 

 

 

drilling stainless steel
4. Place the Magnetic drilling machine on the suction areas of clamping plate in a position that the annular cutter enters through the internal drilling area of the clamping plate. Insert the annular cutter into the magnetic drilling machine, position the pilot pin, switch on the magnet of the magnetic drilling machine and proceed to drill as per the user manual of the magnetic drilling machine.

 

 

 

 

 

 

 

 

 

 

 

 

The magnet clamping force is dependent on the condition of the substrate. The clamping force is significantly reduced by paint, zinc and scale coatings and rust. The substrate must satisfy the following preconditions in order that a sufficient magnet clamping force can be achieved:

• The substrate must be magnetic.

• The clamping surface and the magnetic foot must be clean and grease-free.

• The clamping surface must be completely smooth and level.
NOTE. Clean the substrate and the magnetic foot of the machine before use. Remove any unevenness and loose rust from the substrate. BDS offers special holding devices in its range of accessories. The best clamping effect is obtained on low-carbon steel substrate with a thickness of at least 20 mm.

The best clamping effect is obtained on low-carbon steel substrate with a thickness of at least 20 mm.

Detailed specifications

Order no.

ZAV 400

Specification

"High performance vacuum pump with circular oil lubrication. Clamping plate with two suction areas and internal drilling area. Size: 440×260 mm, long hole: 50×120 m"

EAN

4250187500503

Reviews

There are no reviews yet.

Be the first to review “Non Ferrous Material Drilling Clamp for Smooth Surface Plate”